見つかりました 68 試験結果 "

adjustable air differential pressure switch

空気または液体を制御するための SPDT デュアル圧力スイッチ

SPDT dual pressure switch for controlling air or liquid Description What is the two pressure used in pressure switch? There are two main types of pressure switches: mechanical pressure and electronic pressure switches. A mechanical pressure switch has a mechanical pressure-sensing part that deforms according to the fluid pressure. Q830 series dual pressure controls can be not only used in fluorinated refrigerant, but also in the air and liquid (allowed liquid temp. -20 to 120

ステンレス鋼の水ポンプのための二重調節可能な圧力スイッチ

Dual adjustable pressure switches pressure switch water pump Description The working principle of the pressure switch: when the pressure in the system is higher or lower than the rated safety pressure, the disc in the sensor will move instantaneously, and the switch connector will be connected or disconnected by connecting the guide rod. When the pressure drops to or rises to the rated recovery value, the disc will reset instantaneously, and the switch will reset automaticall

差圧センサ KDP210 耐久性 PC ABS 防爆型圧力トランスミッタ極端な温度環境向け

Product Description: The DPT Differential Pressure Transmitter is a high-quality electronic pressure sensor designed for accurate measurement of differential pressure in various applications. With a protection rating of IP65/NEMA4, this compact pressure sensor is suitable for use in environments where dust and water ingress need to be minimized. One of the key features of the DPT Differential Pressure Transmitter is its versatile mounting options. It can be installed either

HVAC/Rの圧縮機のための二重圧力スイッチは、低圧の自動車調節する

Dual Pressure Switch for HVAC/R Compressor, Low Pressure Auto Adjust Description Where should a pressure switch be installed? Except for special installations such as constant pressure water pump systems in-well systems that do not use a conventional water pressure tank or water storage tank, the pressure control switch should be located as close to the pressure tank as possible. Q830 series dual pressure controls can be not only used in fluorinated refrigerant, but also in

KDP210Q 差圧トランスミッター

Product Description: The DPT Differential Pressure Transmitter is a versatile and reliable product designed for accurate pressure measurement in various industrial applications. With multiple output signal options including 4-20 mA(2 Wire), 0-5V/0-10VDC(3 wire), RS-485, and customization available, this transmitter offers flexibility to suit different system requirements. Operating effectively in a wide temperature range from -40°C to +70°C, the DPT transmitter can withstand

差圧センサ KDP210IP65 保護電子デジタル圧力スイッチ 16-30VAC/DC 3線式 18-30VDC 2線式産業用途向け

Product Description: The DPT Differential Pressure Transmitter is a reliable and accurate device designed for measuring differential pressure in a variety of industrial applications. With a measurement range of 0-10000Pa, this transmitter offers precise readings for monitoring pressure differences in different systems. One of the key features of the DPT Differential Pressure Transmitter is its manual calibration auto zero function. This allows for easy and convenient

DPT110 差圧トランスミッタ -10000～10000 Pa 4-20mA RS-485

Accurate Measurement Range -10000---10000 Pa DPT110 Differential Pressure Transmitter Product Attributes Tolerated overpressure *15 Output Signal 4-20 MA(2 Wire) ; 4-20 MA(2 Wire) ;0-5V/0-10VDC(3wire); RS-485; Customized Operating Temperature -20 To +70°C Repeatability ±0.01 % At FS /Year Auto Zero Manual Calibration Measurement Units Pa, MmH₂O, InWG, MmHG,mbar Meida Air And Neutral Gases Response Time 0.5s Product Description The DPT Differential Pressure Transmitter is a

RS485 DPT 差圧トランスミッター温室 DPT センサー

RS485 -1000~+1000Pa high quality plastic differential pressure transmitter for greenhouse Description KDP110 differential pressure transmitter detects differential pressure or gauge pressure and converts this pressure value into proportional electrical signal for inteligent building energy management system to measure the accurate pressure and flow required for building pressurization and air flow control. It is widely used in the monitoring of air or neutral gas,and a

IP54 ステンレス鋼調節可能な圧力スイッチ白色差圧流量スイッチ

IP54 Stainless Steel Adjustable Pressure Switches White Differential Pressure Flow Switch Description Q series single pressure controls can be not only used in fluorinated refrigerant, but also in the air and liquid(allowed liquid temp. -20 to 120°C) Adjustable range and differential settings Renovated SPDT micro-switch ensures the reliable switch function Flexible mounting bracket suits various kids of application Upper lid is optional (IP44) Various connections are

3 4 5 6 7

Keram (Nanjing)ELECTRICAL Equipment Co., Ltd.

adjustable air differential pressure switch