見つかりました 142 試験結果 "

ip65 temperature humidity transmitter

0-10V 温度&湿度トランスミッター HVAC

0-10V temperature & humidity transmitter HVAC Description KTH500 temperature and humidity transmitter is a transmitter designed with display. The backlight LCD display can make customers clearly observe the changes of temperature and humidity in places with poor light. At the same time, it can be installed according to different installation methods of customers. Available in wall and duct and cable versions. Feature LCD display Large size backlight display Shell connected by

4-20mA PT1000 トランスミッター 100mm 160mm 250mm 16-30V

4-20mA PT1000 Transmitter 100mm 160mm 250mm 16-30V Description KTP110 temperature Transmitter Temperature Transmitter For Water or oil 0-10V Output IP65 For temperature measurement in gases, in pipes and tanks at low pressure and low flow. To be mounted with compression fitting either direct into the process. Features Temperature range from -70...+500 °C Different heads available, up to IP65 Optional head-mounted transmitter Inserts sheath material stainless steel Suitable

Pt1000 R0 1000Ω HVACシステム用温度伝達器

Pt1000 R0:1000Ω temperature transmitters for HVAC system Description Because the shell of KTP110 series temperature sensor is made of stainless steel, its operating temperature environment can reach -35 to +150°C, making it suitable for more application scenarios and meeting the needs of different customers. Features Temperature range from -70...+500 °C Different heads available, up to IP65 Optional head-mounted transmitter Inserts sheath material stainless steel Suitable for

KTH500 軽量センサートランスミッター重荷圧力範囲と4-20mA出力信号

Product Description: These Sensor Transmitters are their cable gland, which is designed with an M16*1.5 size to ensure a secure and reliable connection to the monitoring system. This helps to prevent any interference or signal loss that could compromise the accuracy of the sensor data being transmitted. Additionally, these transmitters are capable of handling a maximum current of 72A, making them suitable for a wide range of industrial applications. The Sensor Transmitters

4-20mA 3ワイヤの温度湿度と圧力センサー

4-20mA 3 wire temperature humidity and pressure sensor for HVAC Description KTH500 temperature and humidity transmitter is a transmitter that can be used at -30°C. At this temperature, not only does the display screen normally display without discoloration, but the accuracy can also be guaranteed, which greatly enhances the requirements of the use environment. Effectively reduce customer costs. Feature LCD display Large size backlight display Shell connected by hinge More

2 室内プールの電線温度伝達器

2 wire temperature transmitters for Indoor pools Description For temperature measurement in gases, in pipes and tanks at low pressure and low flow.To be mounted with compression fitting either direct into the process. Features Temperature range from -70...+500 °C Different heads available, up to IP65 Optional head-mounted transmitter Inserts sheath material stainless steel Suitable for most common thermowells A pplication HVAC system Green houses Refrigeration system

RS485 LCDディスプレイエレクトロニックフィールドのための空気速度送信機

RS485 LCD display air velocity transmitter for electronic field Description The KAV110 series wind speed transmitter is equipped with a microcontroller in order to accurately calibrate the whole process data, and digitally display the linear compensation and temperature compensation, so that the transmitter will have high precision and the measured data will be more accurate. Specification Model KAV110 Power supply 16-24VAC or VDC output 4-20mA/ 0-5V/ 0-10V/ RS-485 Operating

NEMA 4 保護クラスと ± 0.01% 繰り返し安定性を持つ大型センサー送信機

Product Description: Our Sensor Transmitters are equipped with a 4-20mA output signal, making it easy to integrate with existing systems. The vertical installation design also ensures that it can be easily integrated into your current setup. With a response time of less than 1 second, our Sensor Transmitters are a quick and accurate solution for industrial applications. The pressure range is also adjustable for both high and low-pressure ranges, making it a versatile solution

KAV120シリーズの気速伝達機

ABS IP65 Air RS485 Velocity Transmitter High Temperature Resistant Description KAV120 air velocity transmitter Cable type Air Velocity Transmitter RS485 Output IP65 KAV120 series air velocity transmitter adopts high temperature resistant and corrosion resistant material shell, which can achieve stable and reliable performance even in harsh working environment. Compared with the traditional velocity sensor, it can obtain better stability, can ensure faster and accurate small

10 11 12 13 14

Keram (Nanjing)ELECTRICAL Equipment Co., Ltd.

ip65 temperature humidity transmitter