English
中文
Français
Deutsch
Italiano
Русский
Español
Português
Nederlandse
Ελληνικά
한국
العربية
हिन्दी
Türkçe
Indonesia
Tiếng Việt
ไทย
বাংলা
فارسی
Polski
KDP110シリーズ差圧トランスミッター
もっと見る
動画
CE 16 から 30V DPT 差圧トランスミッター
CE 16 To 30V DPT Differential Pressure Transmitter Description KDP210 Series Differential pressure transmitter Building Automation DPT Air Differential Pressure Transmitter 0-5V 0-10V Output IP65 The KDP210 differential pressure transmitter has high accuracy, ultra-low & adjustable range, fast response characteristics, widely used in clean electronics and pharmaceutical factories, as well as large commercial buildings, medical centers and transportation hub. Feature Ranges
KDP210シリーズ差圧トランスミッター
もっと見る
動画
0~5V/0~10VDC 公共交通ハブ用の3ワイヤの差圧トランスミッター
0~5V/0~10VDC(3wire) differential pressure transmitter for public transport hub Description KDP110 series differential pressure transmitter, its rigorous design enables it to be used in harsh environments and still maintain excellent accuracy requirements, the accuracy can reach
Qシリーズ単圧スイッチ
もっと見る
動画
IP54 調節可能な圧力スイッチ CE 調節可能な空気圧縮機 圧力スイッチ
IP54 Adjustable Pressure Switches CE Adjustable Air Compressor Pressure Switch Description The pressure switch adopts high-precision, high-stability pressure sensor and transmission circuit, and then uses the special CPU modular signal processing technology to realize the detection, display, alarm and control signal output of the medium pressure signal. Pressure switches can be widely used in petroleum, chemical, metallurgy, electric power, water supply and other fields to
Q830シリーズ 双圧スイッチ
もっと見る
動画
IP54 調節可能な空気圧縮機 圧力スイッチ センサー ステンレス鋼
IP54 White Stainless Steel Pressure Switch For Air And Liquid Description The pressure switch is a simple pressure control device, when the measured pressure reaches the rated value, the electronic pressure switch can issue an alarm or control signal. The working principle of the pressure switch: when the pressure in the system is higher or lower than the rated safety pressure, the disc in the sensor moves instantaneously, and the switch connector is pushed on or off through
QADシリーズ差圧スイッチ
もっと見る
動画
1.5A 10 KPa HVAC 圧差スイッチ 空気圧縮機および産業冷却システム
1.5A Air Differential Pressure Switches, 10 KPa DP Switch for HVAC QAD Series Differential Pressure Switches are designed to sense minute pressure changes and are widely used for controlling aerator flow, monitoring fans and air conditioners. These switches are also suitable for over-heating protection and frost protection in industrial cooling systems. The innovative design allows for visual adjustment of the set point. Technical Specifications Model QAD Media Air, non
KTS100シリーズ温度センサー
もっと見る
動画
-40~+70°C 温度センサー 暖房と HVAC
2 wire NTC 10k B3950 temperature sensor for air condition system Description The KTS100 wall-mounted temperature sensor has the characteristics of easy installation and disassembly, making it suitable for use in HVAC systems. The excellent design makes its protection level reach IP65, which can be well adapted to the outdoor measurement environment. Shell material, so that the working environment temperature can reach -40~+200℃. Features Range from -40 to +200°C Resistance
KTP110シリーズ温度センサー
もっと見る
動画
4-20mA PT1000 トランスミッター 100mm 160mm 250mm 16-30V
4-20mA PT1000 Transmitter 100mm 160mm 250mm 16-30V Description KTP110 temperature Transmitter Temperature Transmitter For Water or oil 0-10V Output IP65 For temperature measurement in gases, in pipes and tanks at low pressure and low flow. To be mounted with compression fitting either direct into the process. Features Temperature range from -70...+500 °C Different heads available, up to IP65 Optional head-mounted transmitter Inserts sheath material stainless steel Suitable
KTT110シリーズの温度伝達機
もっと見る
動画
KTT110シリーズの温度伝達機
Chinese manufacturer temperature sensor NTC for temperature measurement in building automation Description The KTT110 series duct mount transmitter is a low-cost temperature transmitter designed for temperature measure-ment in the HVAC field;it is suitable for building automation systems(BA systems) in commercial buildings and otherconventional buildings IP65 degree of protection facilitates simultaneous outdoor measurements;the transmitter output has 4-20mA,0-10V and RS-485.
KTH500シリーズ 温度と湿度伝達器
もっと見る
動画
取り替え可能なVaisalaの温度および湿気の送信機4-20mA
4-20mA replaceable vaisala temp humidity temperature and humidity transmitter Description The KTH500 temperature and humidity transmitter is a high-precision device that can meet different customer needs. It can adjust the output mode and temperature range through the dial switch. Customers can change the output mode and range according to their own needs, greatly reducing the customer's use cost. Feature LCD display Large size backlight display Shell connected by hinge More
KTH510シリーズ 温度と湿度伝達器
もっと見る
動画
rs485 温度湿度センサー HVAC
rs485 temp humidity sensor HVAC Description With the increasing importance of humidity parameters in air conditioning and ventilation and industrial processes, the application of temperature and humidity transmitters is becoming more and more extensive. Currently, HVAC and industrial are the two most important markets for temperature and humidity transmitters. KTH510 series temperature and humidity transmitter is a customer that can meet different requirements for temperature
KAV110 シリーズ 空気速度送信機
もっと見る
動画
空気管を装着した空気速度伝達器 4-20mA
Air Duct Mounted Air Velocity Transmitter 4-20mA Description KAV110 air velocity transmitter Air Duct Mounted Air Velocity Transmitter 4-20mA Output IP65 KAV110 series air velocity transmitter adopts high temperature resistant and corrosion resistant material shell, which can achieve stable and reliable performance even in harsh working environment. Compared with the traditional velocity sensor, it can obtain better stability, can ensure faster and accurate small air volume
KAFS 空気流通スイッチ
もっと見る
動画
ダクトフロースイッチ 調整可能なエアフロースイッチ
Duct flow switch adjustable air flow switch Description KAFS Air Flow Switch is an field adjustable, paddle vane switch, capable of detecting a wide range of velocities. KAFS Air Flow Paddle Switch is suitable for use in ducts 8″ or over using full, stainless steel vane provided. This vane is trimmable for smaller ducts. Application Control and monitor air and non aggressive gases flow in ducts, chambers, etc.,of heating, cooling, and air conditioning equipment. Features ●
KWFSシリーズ液体流量スイッチ
もっと見る
動画
調節可能な取り替え可能なDanfossの水流スイッチSPDT単段
Replaceable danfoss water flow switch Description KWFS series water flow switch is a flow switch that can be used under the medium temperature of - 20~120 ℃. Its unique housing material allows its working environment temperature to reach - 40~85 ℃, which can meet the requirements of some customers for the use environment. Its IP65 protection level allows it to effectively protect internal components and extend the service life of the equipment. The working principle is that
